Tool List - Siemens SINUMERIK 840D sl Operation/Programming Manual

08/2005
2

2.5.2 Tool list

♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Enter a unique tool name.
You can edit the tool name as required. A tool name may contain
a maximum of 17 characters. You can use letters, digits, the
underscore symbol (_), periods (".") and slashes ("/").
Enter the offset data of the tool.
In the tool list, enter all the tool parameters that are needed:

for calculating the tool length or radius offset,

for calculating the machining cycles,

for displaying the tools during the simulation of the program
execution.
Depending on the tool type, various parameters are required.
Cutter radius
Length Z
Rougher/Finisher
Setting Up the Machine
2.5 Tools
Toolholder
angle
Cutting direction
Plate angle
2
2-57