Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony DCR-TRV950 Network Function Operating Instructions Manual

Step 1 Preparing the power supply

Installing the battery pack

(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of the arrow while pressing BATT
down.
If you use the large capacity battery pack
If you install the NP-FM70/QM71/FM90/FM91/QM91 battery pack on your camcorder,
extend its viewfinder.
1
2
1
2
2
BATT release
button
15