Selecting The Image Size - Sony DCR-TRV950 Network Function Operating Instructions Manual

Using a "Memory Stick" – Introduction

Selecting the image size

You can select either of two image sizes
Still images:
Moving pictures: 320 × 240 or 160 × 112
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only). Make
sure that the LOCK switch is set to the further side (unlock position).
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET (still
image) or MOVIE SET (moving picture) in
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as follows:
Still images:
Moving pictures:
1
LOCK
MENU
1152 × 864 or 640 × 480. (When the POWER switch is set to CAMERA
or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1152 × 864.
The default setting is 320 × 240.
1152
320
POWER
MEMORY/
NETWORK
, then press the dial (p. 211).
640
160
3
STILL SET
MEMORY SET
1152
STILL SET
BURST
QUALITY
1152 × 864
IMAGESIZE
640 × 480
RETURN
REMAIN
12
[ MENU ] : END
4
STILL SET
MEMORY SET
STILL SET
BURST
QUALITY
640 × 480
IMAGESIZE
RETURN
REMAIN
40
[ MENU ] : END
MOVIE SET
MEMORY SET
320
MOVIE SET
320 × 240
IMAGESIZE
160 × 112
REMAIN
RETURN
REMAIN
1min
[ MENU ] : END
MOVIE SET
MEMORY SET
MOVIE SET
160 × 112
IMAGESIZE
REMAIN
RETURN
REMAIN
5min
[ MENU ] : END
133