Adjusting The Hinges - Miele CVA 6805 Operating And Installation Instructions

Installation
Four M5 screws are supplied for
aligning and securing the machine in its
niche.
 Open the front of the machine and
loosely fit the screws at either side.
 Carefully turn the lower screws to
centre the machine in the niche.
 Tighten both upper screws by hand
to secure the machine in the unit. Do
not overtighten them.
100

Adjusting the hinges

If the machine front becomes difficult to
open or close after installation, you can
adjust the hinges to realign it (TX 20):
 Tighten screw  to align the front of
the machine so that it is flush with the
front of the housing unit.
 Tighten screw  to align the front of
the machine horizontally and
vertically.