Operation; Switching On; Adjusting The Flame; Switching Off - Miele CS 1028 G Operating And Installation Instructions


Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.

Switching on

 Push in the control knob and turn it
anti-clockwise to the ignition
symbol . The ignitor will "click" and
ignite the gas.
 When a flame is visible, keep the
control knob pressed in for
5-10 seconds, and then let it go.
 If the burner does not ignite, turn the
control knob back to "". Air the room
or wait at least one minute before
trying again. Try keeping the control
knob pressed in for a little longer the
next time.
 If the burner does not ignite the
second time, turn the control knob
back to "" and see "Problem solving
guide".

Adjusting the flame

The burners can be regulated at any
level between the strongest and
weakest flame.
As the outer part of the flame is much
hotter than the centre, the tips of the
flames should stay beneath the pan
base. Flame tips which extend beyond
the sides of the pan merely warm up
the air in the room and can also
damage pan handles and increase the
danger of injury.
 Adjust the flame so that it does not
spread out beyond the sides of the
pan.

Switching off

 Turn the rotary control clockwise to
the  position.
The gas supply is cut off and the flame
goes out.

Operation

23