Miele F 12016 S-2 Operating And Installation Instructions page 39

Message
The mains connection
symbol , appears
and the alarm sounds.
The temperature display
will also show the
warmest temperature
recorded in the freezer
during an interruption to
the power supply or a
power cut.
The  symbol lights up
in the display, the appli-
ance does not get cold,
although the controls
and the interior lighting
are working.
"F0 to F5" appears in
the display.
Cause and remedy
The temperature in the appliance in the previous days
or hours has risen too high because of a power cut or
interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
 Touch the alarm off sensor.
The warmest temperature display will go out. The dis-
play will then revert to showing the current temperat-
ure in the freezer.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact the Miele Service Department for informa-
tion on deactivating Demo mode.
There is a fault.
 Call Service.
Problem solving guide
39