Table of Contents
Advertisement
S
AFETY AND
S
TATEMENTS
Safety Information
Documentation reference symbol. If the product is marked with this symbol, refer to
the product documentation to get more information about the product.
WARNING
A WARNING in the manual denotes a hazard that can cause injury or death.
CAUTION
A CAUTION in the manual denotes a hazard that can damage equipment.
Do not proceed beyond a WARNING or CAUTION notice until you have understood
the hazardous conditions and have taken appropriate steps.
Grounding
These are safety class I products and have protective earthing terminals. There must be an uninterruptible
safety earth ground from the main power source to the product's input wiring terminals, power cord, or
supplied power cord set. Whenever it is likely that the protection has been impaired, disconnect the
power cord until the ground has been restored.
For LAN cable grounding:
•
If your LAN covers an area served by more than one power distribution system, be sure their safety
grounds are securely interconnected.
•
LAN cables may occasionally be subject to hazardous transient voltages (such as lightning or
disturbances in the electrical utilities power grid). Handle exposed metal components of the network
with caution.
Shielded Signal Cables
Use only shielded cables for connecting peripherals to any HP ProCurve 700wl Series device to reduce
the possibility of interference with radio communications services. Using shielded cables ensures that you
maintain the appropriate EMC classification for the intended environment.
Pluggable Equipment
For pluggable equipment, the socket outlet shall be installed near the equipment and shall be easily
accessible.
EMC R
EGULATORY
E
E-1
Advertisement
Table of Contents
