Safety information
2.4 Use in hazardous areas
Loss of safety of device with type of protection "Intrinsic safety Ex i"
If the device has already been operated in non-intrinsically safe circuits or the electrical
specifications have not been observed, the safety of the device is no longer ensured for use
in hazardous areas. There is a danger of explosion.
• Connect the device with type of protection "Intrinsic safety" solely to an intrinsically safe
• Observe the specifications for the electrical data on the certificate and/or in Chapter
18
WARNING
circuit.
"Technical data (Page 241)".
SIPART PS2 with and without HART
Operating Instructions, 09/2014, A5E00074631-12