Panasonic GT Series Manual page 112

Setting for EHV-CPU128/EHV-CPU64/EHV-CPU32/EHV-CPU16
It should be specified with a programming tool.
Specify the setting for the serial port as below with a programming tool.
Item
Type
Port type *1
Baud rate
Communication procedure
Unit No.
With modem connection
*1 It varies according to the communication method.
*2 For the details of the method of communication setting, refer to the "EH-150EHV series Ladder
Programming Software Control Editor Instruction Manual".
Setting for EH-SIO
Port 1 or Port 2
The setting for the dip switches and the ladder program to perform the default setting is required.
Specify as below with the dip switches for each port.
Item
Baud Rate
Data Length
Parity Bit
Stop Bits
Specify the setting for the communication port of EH-SIO with a ladder program as below.
Item
Default setting of communication mode
Communication procedure
Unit No.
* For the details of the method of communication setting, refer to the "EH-150 Application Manual".
9-4
Special port
For RS232C connection: RS232C
For RS422 connection: RS422/485
For RS485 connection: RS422/485
19200bps
Procedure 1 of transmission control (No unit No.) 1:1 communication
No unit No.
Not check
Setting
19200bps
1
Even
7
Hi-Protocol mode
Procedure 1 of transmission control (No unit No.)
No
Setting
Setting