Motorola GP68 Operation Manual page 2

Turn Radio On
1. Rotate rotary knob clockwise to turn
radio on.
Adjust Volume
1. If there is no receive audio, press end hold the Monitor
Button until you hear background noise.
2. Continue to hold the Monitor Button and adjust rotary Knob
for desired volume level.
3. Release the Monitor Button to squelch radio again.
To Select a Channel
1. Rotate the selector switch clockwise to increase or counter-
clockwise to decrease, the channel number.
The channel number increments, or decrements according to the
available programmed memory channels (i.e. empty channels are NOT displayed).
Locking/Unlocking the Keypad
High/Low Power Output
1. Press (LOW/C) to toggle between High and Low power output levels.
The LOW Indicator is on when the radio is set for Low
power output mode and off when the radio is set for High
power output mode.
Turn Radio Off
1.
clockwise until a click is heard to turn
radio off.
1. Press and hold
keypad and selector switch (takes about 2 seconds).
2. If you attempt to press a key other than
rotate the selector switch while the keypad is locked, the
LCD displays and no action is taken.
Rotate rotary knob counter-
(Lock) to lock (or unlock) the
(Lock) or