Figure C.14 Power Connector Assembly (2) - Samsung RRH-2WB Installation Manual

ANNEX C. Connector Assembly
5) Insert the connector pin assembled with the power cable into the end of connector. The pin map of
connector end and cable is as below.
- C: -48 VDC/Black
- D: Return/White
Push the pin into the end and check if it does not pull off.
6) After connecting the connector end and the pin assembled with the cable, assemble the connector parts
to the connector end one by one.
7) Place the heat shrink tube [38 mm (1.50 in.)] to the lead-in part of connector cable, and shrink it using
the heating gun. Do not shrink the tube for too long time since the jelly might come out too much.
C-16

Figure C.14 Power Connector Assembly (2)

© SAMSUNG Electronics Co., Ltd.