7) Insert the heat shrink tube into the 1/2 in. feeder line fitted with the N type-male connector as shown in the
figure below.
- Heat shrink tube: Ф 28 mm, 100 mm (Ф 1.1 in., 3.94 in.)
8) Shrink the heat shrink tube inserted into the 1/2 in. feeder line using a heating gun.
Figure C.4 Assembling the N type-male (1/2 in. Feeder Line) Connector (4)
Checking to carry out when assembling the N type-male connector
The shape, tool and assembly method may differ depending on the connector
type and manufacturer. Make sure to check the user manual provided by the
manufacturer before assembling.
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
Clamping Nut
Heat Shrink Tube
28 mm (1.1 in.)
Heating Gun
C-5