Battery Housing; Operating Handle; Power Trigger - Husqvarna 536LiL Workshop Manual

5.18 Battery housing

5.18.1 To disassemble the battery housing
1. Remove the 4 screws and remove the battery
housing half.
5.18.2 To assemble the battery housing
• Assemble the battery housing in the opposite
To disassemble the battery housing on
sequence of
page 37 .

5.19 Operating handle

5.19.1 To disassemble the operating handle LiL,
LiLX/iLX, LiC/iC
Note: Make a note of how the wires and components
are installed before disassemble. Make sure to put them
correctly to prevent damage when the product is
assembled.
1. Remove the 6 screws and remove the handle.
5.19.2 To disassemble the operating handle
LiR, LiRX/iRX
Note: Make a note of how the wires and components
are installed before disassemble. Make sure to put them
737 - 002 - 25.10.2018
correctly to prevent damage when the product is
assembled.
1. Remove the 3 screws (A) and 1 screw (B) and
remove the handle.
5.19.3 To assemble the operating handle
• Assemble the operating handle in the opposite
Operating handle on page 37 .
sequence of

5.20 Power trigger

5.20.1 To disassemble the power trigger
lockout and power trigger
1. Disassemble the operating handle. See
handle on page 37 .
2. Remove the power trigger lockout and the power
trigger from the handle.
a) LiL, LiLX/iLX, LiC/iC
A
B
Operating
Repair instructions - 37