Husqvarna 536LiL Workshop Manual page 31

5. Lift out the main switch and disconnect the cables (A
and B), the connector (C) and the keypad (D).
D
6. Disassemble the wear guard below the battery
To remove the wear guard from the
housing. See
battery housing on page 36 .
7. Disassemble the battery housing. See
disassemble the battery housing on page 37 .
5.15.1.2 For products with S/N: LiR, LiRX/iRX
201510000-:
1. Remove the operating handle. See
handle on page 37 .
2. Remove the wear guard. See
wear guard on page 21 .
3. Remove the power trigger lock and power trigger.
To disassemble the power trigger lockout and
See
power trigger on page 37 .
4. Remove the 4 screws and the 2 cable holders.
737 - 002 - 25.10.2018
A
C
B
To
Operating
To disassemble the
5. Lift out the main switch and disconnect the wire.
Disassemble the keypad and its cables.
6. Disassemble the wear guard below the battery
To remove the wear guard from the
housing. See
battery housing on page 36 .
7. Disassemble the battery housing. See
disassemble the battery housing on page 37 .
8. Disassemble the connector on the control unit.
To
Repair instructions - 31