Message Format; Accessing Messages - Sony CM-SB200 Operating Instructions Manual

Message format

Text messages received by your phone are just strings of characters. To
make message reading easier, you can set your phone to format the text
using one of the following settings:
Setting How message is displayed How text is affected
Exactly as received
none
partial Long lines of text are
wrapped without
improper word breaks
full Long lines of text are
wrapped. Extra spaces
and lines are removed.
1 From the Display menu, scroll and select Msg. Format.
2 Scroll and select none, partial or full.

Accessing messages

1 Press
The Messages display appears indicating the number of messages
found in each of the following mailboxes:
• Voice mail messages.
• Unread text messages and pagings.
• Old text messages and pagings stored in memory.
Duplicate messages
If you receive the same message more than once, only the most recent
duplicate message is stored and Duplicate is displayed next to it.
To erase a message
1 After reading a text message or listening to a voice mail
message, push Jog Dial.
2 Scroll and select Erase Msg.
To go back to the Messages display without erasing the message,
press CLR .
52
SB200 50-56 sms
Twelve consecutive characters
are displayed on each line with
every thirteenth character
displayed on the next line
regardless of word breaks.
If a word doesn't fit on the
current line, the entire word is
moved to the next line.
Text is read easily because it's
wrapped, but it also keeps the
text as compact as possible.
from the standby display.
52 4/9/99, 2:21 PM