Sony CM-SB200 Operating Instructions Manual page 45

Setting the roaming alert
"Roaming" is when you use your phone outside of the home service
area or other valid service areas. Roaming access to a different carrier
and the types of calls you can make varies with the agreement between
your "home" carrier and the current serving carrier. Check with your
service provider for details.
1 Scroll and select Roam Alert.
2 Scroll and select on or off.
Your phone alerts you when you enter or leave valid service areas.
On the display
Enter roaming icon (R)
Leave Message
Out-of-service icon (
If you are in an analog roaming area
The message Analog Roam is displayed on the standby display when
you're outside your home area and in an analog service area.
Setting the drop alert
If the signal fades, your phone may drop the ongoing call. If a call is
dropped, you will see a message. If you turn Drop Alert on, you will
also hear an audible alarm.
1 Scroll and select Drop Alert.
2 Scroll and select on or off.
Setting the voice privacy alert
The network automatically turns on enhanced voice privacy if it is
available. You do not have to change your phone settings. For details,
contact your service provider.
1 Scroll and select Priv. Alert.
2 Scroll and select on or off.
Enhanced voice privacy alerts
Your phone alerts you with display messages if enhanced voice privacy is
lost or regained. In addition to the message, a beep sounds if you set the
voice privacy alert on.
SB200 37-49 settings
If Roam Alert is on
You'll hear a beep
You'll hear a beep
)
45
45
4/9/99, 2:21 PM