Table of Contents
Advertisement
WAN Configuration
The ADSL Router supports for Asynchronous Transfer Mode (ATM) over ADSL. To set up connections over the
WAN, you have to define ATM PVC interface for each remote connection. On this page, you can create, modify and
delete PVC interface.
You can select an existing ATM PVC interface and click Modify to edit its parameters or click Delete if you want to
delete it.
To add a new PVC interface, click Create a new PVC and follow these steps:
1.
Select one of connection type in the Data Mode (RFC1483 Bridged, RFC1483 Routed, RFC1483 MER, PPPoA
or PPPoE) and click Next.
2.
Fill in the VPI/VCI values and select ATM Service Type, Encapsulation Type and PCR.
3.
Click Apply.
Chapter 3: Configuration
47
Hide quick links:
Advertisement
Table of Contents
