Modbus Setup-Port 1 - Siemens DTU3005-B Operator's Manual

5
Creating Project Files—Modbus Master to Devices
5.3 Modbus Setup—Port 1
You must have a Modbus Master to Devices project
file open to configure port 1 using the instructions in
this section. Select Port 1 (Modbus Master) from the
To select the protocol for the Modbus Master device
connected to port 1, highlight Modbus Protocol and
30
Edit menu, and the Port 1 Modbus Master configura-
tion screen appears.
press Enter. The Modbus Master Protocol selection
menu appears:
Siemens Energy & Automation, Inc.