Bases; Selecting The Base - Siemens Gigaset 3000 Operating Instructions Manual

Bases

Selecting the base

If your handset is logged onto more than one base (sys-
tems*), you can set it to a particular base or "best base" for
automatic base changeover during cross-network roaming
(in conjunction with "ISDN Config").
Note:
If you set
cally connected to the base with the best reception.
If you are located between two systems for example,
and the handset switches continuously, you should set
it to a particular system.
The "ISDN Config" function should always be activated
as a basic setting, see page 25.
* See also note on page 24
Press the menu key.
Scroll to
Confirm the selection.
Scroll to the required base, for exam-
ple,
Press the display key.
Scroll to
Confirm the selection.
The activated base is indicated by a
check mark.
Use the display key to jump to the next
menu level up.
, the handset is always automati-
54
.
.
.