Preparing The Handset; Inserting The Batteries Into The Handset - Siemens Gigaset 3000 Operating Instructions Manual

Preparing the handset

Inserting the batteries into the handset

Note:
Please read the safety notes first, see page 2.
Only use supplied or approved batteries. Do not use
normal (non-rechargeable) batteries, see page 13.
Always change the batteries at the same time and only
insert batteries of the same type and produced by the
same manufacturer.
Hold the handset with the dialling keypad facing down-
wards, see Fig 2. A battery compartment for 2 batteries is
located in the lower part of the handset.
To open the battery compartment, press the grooves and
slide the lid downwards in the direction of the arrow, see
Fig 2. Lift off the lid.
Insert the 2 batteries supplied into the battery compart-
ment, as shown in Fig 2.
Ensure that the batteries are inserted according to cor-
rect polarity.This is indicated in the battery compartment.
Position the lid at a distance of approx. 3 millimetres from
the battery compartment, see Fig 2.
Slide the lid of the battery compartment upwards until it
slots into place.
Fig 2 Inserting the batteries
11