Installing/connecting
4.1
Installing and connecting the CP 1625
Maximum configuration
A maximum of one CP 1625 is permitted per PC.
Prerequisites and requirements
Do not commission damaged parts
Only put undamaged parts into operation!
● Before installing the CP in your PC, read your PC manual, for example, the section
"Procedure for installing PCIe modules". Observe the instructions described in the
manual for your PC.
● If available, enable the plug-and-play mechanism in the BIOS of your PC.
● Before installation, make sure that the jumpers are set correctly on the CP 1625Dev. You
can find information on this in the section: Interfaces and display elements (Page 14).
● The communications processor CP 1625 requires a PCIe slot with master capability.
20
WARNING
CP 1625 / CP 1625Dev
Operating Instructions, 04/2018, A5E43075902-AA
4