Panasonic AK-HRP200G Operating Instructions Manual page 33

Remote operation panel
Table of Contents

Advertisement

Parts and their functions (when operating a camera recorder)
47.
Fader full button <FULL>
Always on (lit) with a camera recorder.
Use this button to set the range of the iris lever all the way from
OPEN to CLOSE.
48.
Auto iris button <AUTO>
Use this button to enable the auto iris function.
On:
Enables the auto iris mode.
Off:
Enables manual adjustment of the iris using the iris lever.
49.
Iris close button <CLOSE>
Use this button to forcibly set the iris to CLOSE.
On:
Forcibly sets the iris to CLOSE.
Off:
Cancels iris CLOSE
50.
Sense control <SENSE>
Use this control to adjust the ZOOM/FOCUS speed.
Turn clockwise:
Increases the speed.
Turn
Decreases the speed.
counterclockwise:
*
1
Not supported by all devices.
51.
Coarse control <COARSE>
This is disabled with camera recorders.
52.
Lens extender indicator <EXT>
This indicator lights to warn that the lens extender is set to something
other than 1x.
On:
The lens extender is set to something other than 1x.
This indicates that the lens extender is not being used or
Off:
that it is not available.
53.
Digital extender indicator <D.EXT>
This indicator lights to warn that the digital extender is set to
something other than 1x.
On:
The digital extender is set to something other than 1x.
This indicates that the digital extender is not being used or
Off:
that it is not available.
<Note>
This cannot be displayed when a camera recorder is connected via a
serial connection.
54.
Memory card slot
Insert a memory card into this slot.
This unit's settings can be stored on a memory card.
However, camera recorder scene files, user files, and lens files
cannot be stored or read.
For details on what memory cards can be used with the unit, refer to
page 6.
55.
Memory card access indicator
This indicator lights when data is read from or written to a memory
card.
*
1
(continued)
33

Advertisement

Table of Contents
loading

Table of Contents