Parts And Their Functions (When Operating A Remote Camera); Operation Panel - Panasonic AK-HRP200G Operating Instructions Manual

Remote operation panel
Table of Contents

Advertisement

Parts and their functions (when operating a remote camera)

This section describes the operation of remote cameras (AW-HE50/ AW-HE60/AW-HE120/AW-HE870 and AK-HC1500/AK-HC1800).

Operation panel

A beep (buzzer) sounds when a button is pressed. However, buttons do not beep when the buzzer is set to Off in setup mode.
1.
Camera power button <HEAD POWER>
Use this button to control remote camera power remotely. However, it
will not function unless the power of the camera itself is turned on.
Each press of the button turns the power of the camera on or off.
On (green):
The camera is turned on.
On (red):
The camera is in standby.
Short flashes
Network authentication not possible in IP connection
(red)
:
mode.
*
1
Off:
The camera itself is powered off.
*
1
Short flashes have an interval of about 0.5 second.
<Note>
This cannot be used for AW-HE870 and AK-HC1500/AK-HC1800.
2.
Viewfinder power button <VF POWER>
This cannot be used for a remote camera.
3.
Color Bar Signal Output button <BARS/TEST>
Use this button to output the color bar signal from the camera.
On (yellow):
Color bar On
On (green):
TEST signal On (AK-HC1500/AK-HC1800 only)
Off:
Color bar Off
4.
Auto White Balance button <WHITE>
Use this button to automatically adjust the white balance.
Indicates that the auto white balance adjustment has
On:
started.
Warns that the automatic white balance adjustment ended
Flashing:
without being completed.
Indicates that the white balance has been adjusted
Off:
correctly.
5.
Auto Black Balance button <BLACK>
Use this button to automatically adjust the black balance.
Indicates that the auto black balance adjustment has
On:
started.
Warns that the automatic black balance adjustment ended
Flashing:
without being completed.
Indicates that the black balance has been adjusted
Off:
correctly.
<Note>
This cannot be used with the AW-HE2.
6.
Auto Setup button <SETUP>
This cannot be used for a remote camera.
7.
5600 K button <5600K>
Use this button to make adjustments to achieve a white balance that
corresponds to a 5600K color temperature.
On:
ON
Off:
OFF
<Note>
This cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/
AW-HE2.
8.
Matrix button <MATRIX>
This cannot be used for a remote camera.
20
1
2
3
4
5
6
AUTO
HEAD
VF
POWER
POWER
BARS
WHITE
BLACK
SET UP
TEST
KNEE
DTL
SHUTTER
5600K
MATRIX
SKINDTL
OFF
OFF
ON
STEP/SYNC
7
8
9
10
11
12
9.
Skin Detail button <SKINDTL>
Use this button to apply coring to the detail enhancement of the skin
tone areas to soften or increase the enhancement of skin tone details.
On:
Off:
<Note>
This cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/
AW-HE2.
10.
Knee OFF button <KNEE OFF>
This cannot be used for a remote camera.
11.
Detail OFF button <DTL OFF>
Use this button to disable the contour enhancement (hard/soft)
function (detail enhancer) of image output.
On:
Off:
<Note>
This cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/
AW-HE2.
12.
Shutter On/Off button <SHUTTER ON>
STEP/SYNC select button <STEP/SYNC>
Use thus button to turn the SHUTTER on or off. Press and hold the
button to switch between STEP and SYNCHRO. In SHUTTER ON
mode, the SHUTTER display select button <SHUTTER> and the
SHUTTER display <SHT> light, and the setting is displayed on the
setting display for about 2 seconds.
On:
Off:
<Note>
• The adjustment values in SYNCHRO mode are not displayed on the
setting display. Furthermore, the adjustment operation is also not
possible.
• If the shutter is turned off with AW-HE50/AW-HE60/AW-HE120, the
shutter speed becomes 1/100 or 1/120 when the shutter is turned
on the next time.
• This cannot be used with the AW-HE2.
ON
OFF
Detail enhancer off
Detail enhancer on
SHUTTER ON (STEP/SYNCHRO can be selected)
SHUTTER OFF (STEP/SYNCHRO can be selected)

Advertisement

Table of Contents
loading

Table of Contents