Sharp SL-5500 Startup Manual page 9

00 Cover.book Page 7 Saturday, January 19, 2002 11:33 AM
5.
Slide the battery replacement switch to the "NORMAL OPERATION" position.
When you use the battery for the first time, charge the battery.
To charge the battery using the AC adapter
Note: Only use the "EA-70" AC adapter (supplied).
1.
Connect the AC power
cord to the AC adapter.
2.
Plug the AC adapter
connector into the SL-
5500 which contains
the battery as shown on
the right.
3.
Plug the AC power cord into an AC outlet.
The LED indicator on the unit (charge light) will turn amber when charging
begins.
Standard charging time is approximately 2.5 hours (depending on the
temperature and usage conditions).
4.
When charging has been completed, the LED indicator will turn off. Unplug the
AC power cord from the AC outlet, then unplug the AC adapter connector from
the SL-5500.
Note:
• Charge the battery to its full capacity until the LED indicator turns off.
AC adapter jack
AC power
cord
AC adapter
connector
AC adapter
Quick Start
AC adapter
AC power
cord
To AC
outlet
7