Personal Mobile Tool SL-5500 Personal Mobile Tool SL-5500 Personal Mobile Tool SL-5500 Personal Mobile Tool SL-5500 Personal Mobile Tool SL-5500 USB DRIVER INSTALLATION GUIDE Introduction This guide explains the methods of installing the USB driver for the SL-5500's Docking Station onto the PC, to enable communication between the two devices through the USB port.
USB driver Installation guide for Microsoft Windows 2000 First, log on as Administrator. Close all applications on your PC. If you are using the anti virus or firewall software, close them (or disable their function). Place the SL-5500 on the Docking Station with SL-5500 turned on. Connect the AC adapter to the Docking Station.
Page 3
Select "CD-ROM drive" and Click "Next>". The CD-ROM will be searched, and the suitable USB driver for the device will be found. Click "Next>". - 2 -...
Page 4
WDM Driver will be installed. To continue, click "Finish". The Found New Hardware Wizard should appear sequentially. Click "Next>". Select "Search for the best driver for your device (Recommended)" and Click "Next>". - 3 -...
Page 5
Select "CD-ROM drive" and Click "Next>". The CD-ROM will be searched again, and the suitable USB driver will be found. Click "Next>". To continue the installation, click "Yes". - 4 -...
Page 6
After a few seconds, a finishing dialog should appear as below. To finish, click "Finish". - 5 -...
USB driver installation guide for Microsoft Windows Close all applications on your PC. If you are using the anti virus or firewall software, close them (or disable their function). Place the SL-5500 on the Docking Station with SL-5500 turned on. Connect the AC adapter to the Docking Station.
Page 8
Windows will find a new hardware, and the "Add New Hardware Wizard" will launch. Select "Automatic search for a better driver (Recommended)" and Click "Next>". After a few seconds, Windows will find a suitable driver on the CD-ROM. To continue installation, click "Finish".
USB driver installation guide for Microsoft Windows First, log on as Administrator. Close all applications on your PC. If you are using the anti virus or firewall software, close them (or disable their function). Place the SL-5500 on the Docking Station with SL-5500 turned on. Connect the AC adapter to the Docking Station.
Page 10
After a few seconds, Windows will find the driver on the CD-ROM. To continue installation, click "Finish". Windows will find a new hardware, and the "Found New Hardware Wizard" will launch. Select "Install the software automatically (Recommended)" and Click "Next>". Confirm "SL Series (NDIS 5)"...
Page 11
After a few seconds, Windows will find the driver on the CD-ROM. To continue installation, click "Finish". - 10 -...
USB driver installation guide for Microsoft Windows 98/ 98 Second Edition Close all applications on your PC. If you are using the anti virus or firewall software, close them (or disable their function). Place the SL-5500 on the Docking Station with SL-5500 turned on. Connect the AC adapter to the Docking Station.
Page 13
Check "CD-ROM drive" and Click "Next>". The CD-ROM will be searched, and the suitable USB driver for the device will be found. Confirm "SL Series (WDM)" as its target hardware, and click "Next>". WDM Driver will be installed. To continue, click "Finish". - 12 -...
Page 14
Add New Hardware Wizard should appear sequentially. Click "Next>". Select "Search for the best driver for your device (Recommended)" and Click "Next>". Check "CD-ROM drive" and Click "Next>". - 13 -...
Page 15
The CD-ROM will be searched, and the suitable USB driver for the device will be found. Confirm "SL Series (NDIS 5)" as its target hardware, and click "Next>". NDIS Driver will be installed. To continue, click "Finish". After the installation, the System Settings Change dialog should appear. Click "Yes" to restart your PC.