Removing Air Inlets - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting
9.4

Removing air inlets

Marking casing position for assembly
ABB Turbo Systems recommends marking the casing positions prior to dis-
assembly.
NOTICE
Figure 19: Removing the air inlets
1. Manually secure the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove the filter silencer (81000) or air suction branch (82000).
4. Remove and dispose of O-ring (81010 / 82010) (refer to Disposing of turbocharger com-
ponents [➙ 91]).
© Copyright 2016 ABB. All rights reserved. HZTL4037_EN
Page 64 / 99
Revision A August 2016