Mitsubishi Electric MELSEC iQ-R Series User Manual page 148

CH1 HOLD/CLEAR function setting monitor
The setting status of the HOLD/CLEAR function can be checked.
Monitor value
0
1
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH HOLD/CLEAR function setting monitor
HOLD/CLEAR function setting monitor [Q compatible mode]
When the Q compatible mode function is used, the setting status of the HOLD/CLEAR function can be checked.
The following shows the setting details in the Q compatible mode.
HOLD/CLEAR function setting
monitor (Un\G26)
HOLD/CLEAR function setting
monitor (Un\G27)
(1) 0: CLEAR, 1 to F: HOLD
(2) The buffer memory address 27 of R60DA4 is fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
HOLD/CLEAR function setting monitor
CH1 Wave output conversion cycle monitor
The wave output conversion cycle can be checked with values in 32-bit signed binary.
Only when the wave output function is used and the operation mode is normal mode, a value is stored in the area. Otherwise,
0 is stored.
The unit of the stored value is s.
When 'Operating condition setting request' (Y9) is turned on and off, the monitored value is updated.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Wave output conversion cycle monitor
CH Wave output conversion cycle monitor
(When the Q compatible mode function is used)
APPENDICES
146
Appendix 3 Buffer Memory
CH1 CH2
431 631
b15 ... b12 b11 ...
CH4 CH3
b15 ... b12 b11 ...
CH8 CH7
CH1 CH2
26
CH1 CH2
432 632
433 633
1108 1110
Description
CLEAR
HOLD
CH3 CH4 CH5
831 1031 1231
b8 b7 ... b4 b3
CH2 CH1
b8 b7 ... b4 b3
CH6 CH5
(2)
CH3 CH4 CH5
27
CH3 CH4 CH5
832 1032 1232
833 1033 1233
1112 1114 1116
CH6 CH7
1431 1631
... b0
(1)
... b0
CH6 CH7
CH6 CH7
1432 1632
1433 1633
1118 1120
CH8
1831
CH8
CH8
1832
1833
1122