Table of Contents
Advertisement
Configuring Computer IP Address
6
Configure the IP address of the wired interface of the computer as
follows:
Note
This configuration is for a Windows 7 computer. The same procedure
can be used for other operating systems, however there might be a
slight difference in menu options.
1.
Navigate to Control Panel - Network and Internet - View
network status and tasks.
2.
Select Change adapter settings.
3.
Right-click on Local Area Connection and select Properties. If
a security warning pop-up appears, select
4.
In the Local Area Connection Properties window, double-click
on Internet Protocol Version 4 (TCP/IPv4) .
The Internet Protocol Version 4 (TCP/IPv4) Properties
window opens.
5.
In the General tab, select Use the following IP address.
6.
In the IP address field, enter:
192.168.101.101
•
7.
In the Subnet mask field, enter:
255.255.255.0
•
8.
OK
Select
9.
Select OK to exit the Local Area Connection Properties
window.
10. Verify that the Mini Field Agent is ON.
Note
A green LED light beside ON on the Mini Field Agent indicates
that the device is switched ON.
11. Click Start. In the Search field, enter:
•
cmd
The command prompt window opens.
12. In the command prompt window, type the following and then
Enter
press
ping 192.168.101.2
•
A reply as shown below indicates that the computer is
connected to the Mini Field Agent.
.
.
Yes
.
2094532-001 D 02 2018
Advertisement
Table of Contents
