Silvercrest HealthForYou SFT76 Instructions For Use Manual page 33

guidelines and manufacturer's declaration - electromagnetic interference
The SFT 76 is intended for use in the ELECTROMAGNETIC ENVIRONMENT described
below. The customer or the user of the SFT 76 should ensure that it is used in this type of
environment.
iMMunitY iec 60601-
tests test leVel
ELECTRO- ± 8 kV
STATIC Contact discharge
DISCHARGE ±2 kV, ±4 kV,
(ESD) in ac- ±8 kV, ±15kV
cordance with air discharge
IEC
61000-4-2
Fast transient ± 2 kV for power
electric distur- cables ± 1 kV for
bances / bursts
input and output
in accordance cables
with IEC
61000-4-4
Impulse volt- ± 1 kV voltage
ages/ surges external
in accordance conductor
with IEC External
61000-4-5 conductor
± 2 kV voltage
external conduc-
tor earth
34 GB/IE/NI
coMPliance electroMagnetic
leVel enVironMent -
guidelines
± 8 kV Floors should be made from
Contact wood or concrete or be dec-
discharge orated with ceramic tiles. If
±2 kV, ±4 kV, the floor is covered with syn-
±8 kV, ±15kV thetic material, the relative
air discharge humidity should be at least
30%.
Not applicable
Not applicable