Huawei RRU3931E Installation Manual page 58

RRU3931E
Installation Guide
Figure 1-58 Removing the outer jacket of a cable
Step 3 Remove the outer jacket of each core wire. The length of the removed outer jacket must
match the tool-less female connector (pressfit type). See
Figure 1-59 Removing the outer jacket of core wires
Step 4 Use PVC insulation tapes to wrap the outer jackets of the three core wires and the adjacent
section of the AC power cable. See
Figure 1-60 Insulating a power cable
Step 5 Assemble a tool-less female connector (pressfit type) and the three core wires. See
1-61.
Issue Draft A (2016-03-30)
NOTE
It is good practice to wrap the three core wires for 16 mm and the adjacent section of the AC power
cable section for about 10 mm.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 1-60.
1 RRU3931E Installation Guide
1-59.
Figure
54