Table of Contents
Advertisement
RRU3931E
Installation Guide
Figure 1-10 Fitting the Mounting bracket onto the target pole
1.
2.
Issue Draft A (2016-03-30)
NOTE
Redundant steel belts must be bound.
Open the bolt on each steel belt according to the arrow direction on the mounting base,
and ensure that the rotation axis is connected to the end of the bolt, as shown in
1-11.
Figure 1-11 Position of the rotation axis
Partially tighten each steel belt with the force not less than 50 N, bend it by 180°, and
press the steel belt at turns firmly. See
Figure 1-12 Tighten steel belts
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 RRU3931E Installation Guide
Figure
1-12.
Figure
15
Advertisement
Table of Contents
