Compression - GE PACSystems RX3i User Manual
Profinet io-controller
Hide thumbs
Also See for PACSystems RX3i:
- Command line interface manual (116 pages) ,
- User manual (100 pages) ,
- Application manual (39 pages)
Table of Contents
Advertisement
1.6.1
Compression
Due to the smaller memory capacities of CPE302, CPE305 and CPE310, these CPUs require "Compression"
when attaching RX3i PNS or CEP to their PROFINET configuration.
•
CPE302: User MUST use Target PLC parameter with "Compression" set to HIGH.
•
CPE305: User MUST use Target PLC parameter with "Compression" set to MODERATE.
•
CPE310: User can use Target PLC parameter "Compression" set to NORMAL.
•
All other CPUs: User can choose to use "Compression" or not.
GFK-2571N
May 2018
Chapter 1. Introduction
15
Advertisement
Table of Contents
