Miele CM 7750 Quick Start Manual

Cleaning and care
Cleaning the central spout Degreasing the brew unit The following message will appear in the
display: Fit the brew unit with a tablet in it.
If the central spout is in the uppermost You need 1 Miele cleaning tablet to
position it cannot be dismantled. The degrease the brew unit. The process takes
central spout must be moved into the approx. 12 minutes.
maintenance position to do this.
The message Degrease the brew unit will
ĺ
Press the  control for 3 seconds. appear in the display.
ĺ
Touch OK.
The maintenance programme will then
start.
ĺ
Follow the instructions in the display.
ĺ
Push the brew unit back into the coffee
Clean the brew unit by hand under
warm running water. Do not use machine.
ĺ
cleaning agent.
Lock the brew unit. Press and hold the
ĺ
button under the brew unit handle and,
Open the machine door.
ĺ ĺ
whilst doing so, turn the handle to the
Carefully pull the stainless steel cover off Release the brew unit. Press and
right.
ĺ
and then pull the dispensing unit off. hold the button under the brew unit
Close the appliance door.
handle and, whilst doing so, turn the
ĺ
handle to the left. Follow the further instructions given in
ĺ
the display.
Carefully pull the brew unit out of the
The cleaning process is finished at the end
coffee machine.
of the rinsing cycle.
When you have removed the brew
"Descale the machine"
unit, do not change the position of the
handle on the brew unit. maintenance programme
ĺ
Clean the brew unit by hand under
Risk of damage from descaling
warm running water.
solution.
ĺ
Sensitive surfaces and/or natural floors
Twist off the upper section with the
holder for the milk pipework  and pull
can suffer damage.
Wipe up any spillages of descaling
it off. Then pull the Y-shaped piece 
off. Remove the dispensing spouts .
agent immediately.
ĺ
Clean all parts thoroughly. Clean the You need 1 descaling tablet for the
surfaces of the central spout with a descaling process. The process takes
damp cloth. approx. 12 minutes.
ĺ
Fit the dispensing unit back together.
The message Descale the machine appears
ĺ
ĺ
Push the dispensing unit back into the in the display.
ĺ
Wipe any remaining coffee off the two
central spout and replace the stainless Touch OK.
filters (see arrows).
ĺ
steel cover.
The maintenance programme will then
ĺ Dry the funnel in the brew unit.
Touch OK. ĺ
start.
Carefully clean the inside of the coffee ĺ
Follow the instructions in the display.
machine.
Tips for use
Bean system Drink parameters
You can change the names for the types of You can set the amount of coffee, the
coffee bean and/or reallocate the types of brewing temperature and pre-brewing for
bean under . each drink individually.
Settings  | Type of beans
ĺ
If you do not allocate a type of bean, you Select Process from the drinks menu
will be asked what type of bean you want using the  arrow sensor.
ĺ
to use for the coffee as you make it.
Touch Change drink and select a drink.
ĺ
Touch .
Drink parameters
ĺ Rename type of beans ĺ
Fill the water container to the Descaling Select Amount of coffee , Brew
The 3 bean containers are shown in the
symbol  symbol with lukewarm water. temperature, Pre-brewing or Type of beans
ĺ display as follows and are pre-named. ĺ
Place 1 descaling tablet in the water. Select the setting you want and
ĺ
touch OK.
Push the water container back into the ĺ
appliance. Touch OK again to save your changed
ĺ
settings.
Follow the further instructions given in
the display. Portion size
ĺ
When Rinse the water container and fill it to
You can adjust the amount of water for all
appears
the  symbol with fresh tap water Type A
coffee drinks, hot water and all types of
in the display: Type B
ĺ Type C tea and the amount of milk for drinks with
Remove the water container and rinse
milk.
ĺ
it thoroughly with clean water. Fill the
If you are using the same type of beans in Place the cup you want under the
water container to the descaling symbol
two or three bean containers at the same central spout or hot water spout.
 with fresh tap water. ĺ
time (for instance because you only use
Select Process using the  arrow sensor.
The descaling process is complete at the ĺ
one type of bean), make sure you name
Touch Change drink and select a drink.
end of the rinsing process.
them in the same way exactly. ĺ
ĺ
Touch Portion size .
Select Change name .
ĺ
The drink will be made and
Save
Enter the name you want (max. 8
appear in the display as soon as the
characters) and then touch Save .
minimum dispensing amount is reached.
ĺ
Allocate type of beans When the cup is filled to the level you
ĺ want, touch .
Save
Select Change allocation .
If you want to change the portion size for
If you have set up one or more Profiles and
coffee drinks made with milk or hot water,
at least one coffee drink, first select the
the ingredients which make up the drink
Profile.
ĺ will be saved one after the other while the
Change the allocation as required and drink is being made.
then touch OK.
Tip: If you touch all , you will have
highlighted all coffee drinks and you will
not be able to deselect the ones you do
not want.
Settings
Profiles Expert mode Changing settings
ĺ
You can set up profiles and individual In Expert mode you can change the Touch the  control.
ĺ
drinks to cater for different tastes and portion size while the drink is being made.
Select Settings .
ĺ
preferences. To do this Expert mode must be switched
Select the option you want and change
on ( Settings  | Expert mode ).
the setting as required.
Creating a profile
ĺ The portion size can only be changed
Select Profiles followed by Create profile .
when the respective ingredient is being
ĺ
Option
processed while the drink is being made.
Enter the name you want (max. 8
characters) and then touch Save . Language
The setting will not be saved and will only
. apply for the current drink.
Processing a profile
Time
When you have created at least one profile
you can choose from the following options Date
under Process :
Dispensing Timer
– Change name
– Delete profile
– Change profile
Stop
Cancel
Creating and processing drinks in a
Expert mode
ĺ
profile
ĺ Touch the segments and adjust the Eco mode
Touch Create drink and select a drink. indicator (small triangle) as you wish.
ĺ Lighting
Change the portion size or drink
parameters.
ĺ
Enter a name for the new drink Type of beans
(maximum 8 characters) and touch Save.
will
When you have created at least one drink Info
you can choose from the following options
System lock
under Process drink :
– Change drink Water hardness
(portion size, drink parameters and
Brightness
name)
Volume
– Delete drink
Cup heating
Spout adjustment
Miele@home
Service
Factory default
ĺ
Touch OK to save the setting.
Tip: touching  takes you back to the
previous menu.
Available settings Comments
deutsch, english and other languages
If you select the wrong language by mistake, you can easily find the Language
Country
flag symbol .
Show (Off / On / Night dimming) Your choice of display will affect the energy consumption of your coffee machine.
Clock format (12 h / 24 h)
Timer 1 (Switch on at, Switch off at,
For Switch on at and Switch off at the timer must be activated and at least one day of the week must be
Switch off after)
allocated.
Timer 2 (Switch on at, Switch off at)
TeaTimer (On / Off)
Descaling timer
On / Off
On / Off
Brightness
(Machine switched on or switched off)
Switch off after
Type A, B and C (Change name, Change
allocation)
On / Off
When the system lock is activated, the Switch on at option for the timer cannot be selected.
soft, medium, hard, very hard
Audible tones / Keypad tones
On / Off
On / Off The height of the central spout cannot be adjusted manually.
Setup Further functions can be taken advantage of if the coffee machine is connected to a WiFi network, and
is signed into the Miele@mobile App (see operating instruction manual).
Evaporate The function removes water from the system and should be used if the machine is not going
Evaporate
to be used for a long period of time or has to be moved.
Demo mode Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for domestic
use.
Appliance settings Language, Time, Date, Number of drinks and Profiles cannot be reset.
Network configuration
Quick Start Guide
Coffee machine
option by following the
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to familiarise yourself with the coffee machine
before using it for the first time. Please read the operating instruction manual
carefully and pay particular attention to the Warning and Safety instructions.
en - GB
M.-Nr. 10 973 630