Terminal Installation - Motorola Cleartone CM5000 Installation Manual

INSTALLATION

Terminal Installation

Control Head Installation
The Control Head can be removed from the housing and turned to any position within a 180° radius.
This provides multiple mounting options for the terminal. For example, the terminal may be mounted
on either side of the vehicle to facilitate the safest and most ergonomically ideal position. The
Control Head may then be turned to provide the most convenient access.
To reposition the Control Head:
1. Remove the 4 screws from the rear on the Control Head.
2. Pull the Control Head away from the terminal assembly.
CM5000 TETRA Mobile Repeater/Gateway Installation Manual
Figure 4 Typical Control Head Removal
27