Operating A Tv With The Remote Control - Samsung 2.006081415135e16 Instruction Manual

Operating a TV with the Remote Control

77
When operating a TV with the remote control
Press the MODE button to make the TV
1
indicator on the remote control flash.
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the
code corresponding to your brand of TV.
Point the remote control toward the TV and
5
press POWER. If the TV turns off or on,
the setting is complete.
Note
•
The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
•
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
•
If the code matches the TV's code, the TV will be turned off.
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
•
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
TV DVD RECEIVER