Tidying Cables Up
Push the cables connected to the
1
HDMI OUT, Component OUT, Video
OUT ports into the groove shown
in figure 1 using the Wire Hanger.
Push the cables connected to the
2
Audio IN, Anynet IN/OUT, Optical
Digital Audio IN and Audio OUT ports
into the groove shown in figure 2.
Open the holder cover of the round
3
board on the bottom of the stand and
pass the cables through the holder.
4
Squeeze the cables into the groove
on the holder of the round board.
5
Close the holder cover.
ENG
Wire Hanger
1
Rear Side of
the Main Unit
2
Round Board Holder
12