NEC UNIVERGE SV9100 Features And Specifications page 779

Program Name/Description
Program
Number
IP Trunk Data Setup – P2P Mode
14-18-03
Enable/Disable P2P Mode.
For Video Call via the System Interconnection
set to 1 (Enable).
IP Trunk Data Setup – Video Mode
14-18-04
Enable/Disable Video Mode.
For Video Call via the System Interconnection
set to 1 (Enable).
IP Trunk Data Setup – SIP Profile (SIP Trunk)
14-18-05
Assign each SIP Trunk to either Profile 1 or
Profile 2.
IP Telephone Terminal Basic Data Setup –
15-05-43
Video Mode
Enable/Disable Video Mode for Standard SIP
terminals.
For Video Call via the System Interconnection
set to 1 (Enable).
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
For Video Call to function set to 1 (Enable).
20-08-13 Class of Service Options (Outgoing Call
Service) – ISDN CLIP
Determine if the ISDN calling line identity
presentation and screening indicators should
be allowed.
21-17-01 IP Trunk (SIP) Calling Party Number Setup
for Trunk
Assign the Caller Party Number for each IP
trunk. The assigned number is sent to the
central office when the caller places an
outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and Program
21-18/ 21-19, the system uses the entry in
Program 21-18/21-19.
21-19-01 IP Trunk (SIP) Calling Party Number Setup
for Extension
Assign the Calling Party Number for each
extension. The assigned number is sent to the
central office when the caller places an
outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and Program
21-18/Program 21-19, the system uses the data
in Program 21-18/Program 21-19.
Input Data
0 = Disable
1 = Enable
0 = Disable
1 = Enable
Profile 1
Profile 2
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 = Off
1 = On
Maximum of 16 digits
*
#
(1 ~ 0, , )
Maximum of 16 digits
*
#
(1 ~ 0, , )
(Profile 1 ~ Profile 2)
779
Default
0
0
Profile 1
0
1
0
No Setting
No Setting