SAFETY PRECAUTIONS
Observe the following items before placing your hand or other part of your
body in an active part of the machine in order to feed production material,
change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric shock.
There are three levels of procedure, shown below, for each kind of work.
Cutting off the power supply of the machine ----------- For repairing the control box.
1
Power supply OFF -------------------------------------------- This is used to turn off power supply normally.
2
Servo switch OFF --------------------------------------------- For changing production board and daily inspection
3
293C-AA00
The breaker to which the
1
machine is connected.
Turn it off.
M73EB
Page 14
Be sure to observe
WARNING
For replacing the control part such as the sensor
For disassembling or replacing parts
For placing or removing board on the conveyor
For placing production materials like the bond.
KEY LOCK
3
Turn it off.
SERVO
SELECT
OFF (
) ON (
Turn it off.
2
293C-E-EMA00-A03-01
)