Gas and Electric Dryer imagine Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register DV431AEP-03021A-01_EN.indd 1 DV431AEP-03021A-01_EN.indd 1 user manual the possibilities DV431AE* DV431AG* 2011-02-08 2011-02-08 11:27:18 11:27:18...
42 minutes! Giving you time for more important things in life. 6. Energy Saving Samsung dryers are super energy effi cient. You can dry up to 3.06 pounds of laundry with 1kWh. Also, both the large capacity and Fuzzy Logic Control save energy by automatically drying your clothes the most effi...
Install the clothes dryer according to the manufacturer’s instructions and local codes. • Do not install a clothes dryer with fl exible plastic venting materials. If fl exible metal (foil type) duct is installed, it must be of a specifi c type identifi ed by the appliance manufacturer as suitable for use with clothes dryers.
Page 4
safety instructions WARNING: To reduce the risk of fi re, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: WARNING 1. Read all instructions before using this appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other fl...
WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not turn on the appliance. • Do not touch any electrical switch. • Do not use any phone in your building. • Clear the room, building or area of all occupants. •...
Do not sit on top of the dryer. Because of continuing product improvements, Samsung reserves the right to change specifi cations without notice. For complete details, see the Installation Instructions packed with your product before selecting cabinetry, making cutouts, or beginning installation.
contents INSTALLING YOUR DRYER OPERATING INSTRUCTIONS, TIPS CARE AND CLEANING SPECIAL LAUNDRY TIPS TROUBLESHOOTING DV431AEP-03021A-01_EN.indd Sec3:7 DV431AEP-03021A-01_EN.indd Sec3:7 Tools needed for installation See Dryer Exterior Ducting requirements Important to installer Location considerations Alcove or closet installation Mobile home installation Exhausting Gas requirements Electrical requirements Grounding...
installing your dryer TOOLS NEEDED FOR INSTALLATION Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup, adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer, you are responsible.
DUCTING REQUIREMENTS • Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct. • Do not use a smaller duct. • Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation. Lint accumulation should be cleaned regularly. •...
installing your dryer If the new dryer is installed into an existing exhaust system you must make sure: • The exhaust system meets all local, state, and national codes. • That a fl exible plastic duct is not used. • To Inspect and clean all lint buildup from inside the existing duct.
ALCOVE OR CLOSET INSTALLATION MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS: Sides – 1 in / 25 mm Rear – 4 in / 102 mm If the washer and dryer are installed together, the closet front must have at least a 72 in² (465 cm²) unobstructed air opening.
Page 12
installing your dryer With optional pedestal base or stacking kit Required Dimensions for Installation With Pedestal 51.7 in. (131.4 cm) to clear open door 48 in.² * (310 cm²) 24 in.² * (155 cm²) Required Dimensions for Installation With Stacking Kit 6 in.
A minimum of 72 in² (465 cm²) of unobstructed space is required. Call 1-800-SAMSUNG(726-7864) for information on purchasing the Floor Anchoring Kit as an accessory. All mobile home installations must be exhausted to the outside with the exhaust duct termination securely fastened to the mobile home structure, using materials that will not support combustion.
installing your dryer GAS REQUIREMENTS Use only natural or LP (liquid propane) gases. THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE ANSI/Z223.1, LATEST REVISION (FOR THE UNITED STATES), OR WITH THE CAN/CGA-B149 INSTALLATION CODES (FOR CANADA). Gas dryers are equipped with a burner vent for use with natural gas.
ELECTRICAL REQUIREMENTS Wiring diagram is located on the back of the dryer. • Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualifi ed electrician or serviceman if you are in doubt as to whether your dryer is WARNING properly grounded.
installing your dryer ELECTRICAL CONNECTIONS Before operating or testing, follow all grounding instructions in the Grounding section. An individual branch (or separate) circuit serving only your dryer is recommended. DO NOT USE AN EXTENSION CORD. Gas models – U.S. and Canada A 120 volt, 60 Hz AC approved electrical service, with a 15-ampere fuse or circuit breaker is required.
CONNECTING THE INLET HOSE Method1 The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses. 1. If space permits, attach the brass female end of the “Y” connector to the cold water faucet. 2.
REPLACEMENT PARTS AND ACCESSORIES If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your dryer or the SAMSUNG customer care center at 1-800-SAMSUNG(726-7864). INSTALLATION Gather the required tools and parts before starting the installation.
Page 19
4. Review the Exhausting section before installing the exhaust system. Install the ductwork from your dryer to the exhaust hood. The crimped end of the duct sections must point away from your dryer. DO NOT use sheet metal screws when assembling ducting. These joints should be taped. Never use plastic fl...
Page 20
installing your dryer 6. Review Gas Requirements section. Remove the pipe thread protective cap. Apply pipe joint compound or about 1 1/2 wraps of Tefl on tape over all threaded connections. Pipe joint compound must be resistant to the action of any liquefi ed petroleum gas. Connect the gas supply to your dryer.
4-WIRE system connections 1. Remove the center terminal block screw. 2. Connect the ground wire (green or unwrapped) of the power cord to the external ground conductor screw. 3. Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (green with yellow stripes) under the central screw of the terminal block.
installing your dryer DRYER EXHAUST TIPS Plastic or non-metal fl exible duct presents a potential fi re hazard. WARNING 1. Make sure your dryer is installed properly so it exhausts air easily. 2. Use a 4” diameter rigid metal duct. Tape all joints, including at the dryer.
DOOR REVERSAL 1. Unplug the power cord. 2. Remove two door hinge screws. 3. Lift the door and remove 4. Remove a screw on the Frame Front 5. Remove the two screws on the opposite side of the door hinge. 6.
operating Instructions, tips OVERVIEW OF THE CONTROL PANEL To select a cycle, rotate the Cycle Selector dial to the desired cycle. The indicator light by the cycle name will illuminate. The Normal, Heavy Duty, Towels, Perm Press, Delicates and Sanitize cycles are Sensor Dry cycles. Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (more dry to damp dry) is reached.
Page 25
The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed. The estimated time remaining may fl uctuate as the cycle progresses. The Drying light will illuminate and remain lit until the cycle is complete. When your dryer is in the cool-down phase, the Cooling light will illuminate.
Page 26
operating Instructions, tips To select the correct temperature for the load, press the Temp button. An indicator light will illuminate next to the desired temperature. Press the button repeatedly to scroll through the settings. High – For sturdy cottons or those labeled Tumble Dry. Medium –...
CHILD LOCK A function to prevent children from playing with your dryer. Setting/Releasing If you want to set or release the Child Lock, press both the Temp. and Time buttons simultaneously for 3 seconds. How to Set: 1. It can be set while your dryer is running. 2.
operating Instructions, tips RACK DRY Installing the drying rack 1. Open the dryer door. 2. Position drying rack in tumbler, placing the front lip of the drying rack on the top of the lint fi lter. 3. Place the rear legs in the two recessed areas of the dryer’s back wall then push down the middle of the drying rack to fi...
CLEAN THE LINT FILTER • After each load. • To shorten drying time. • To operate more energy effi ciently. Do not operate your dryer without the lint fi lter in place. LOAD THE DRYER PROPERLY • Place only one washload in your dryer at a time. •...
care and cleaning CONTROL PANEL Clean with a soft, damp cloth. Do not use abrasive substances. Do not spray cleaners directly on the panel. The control panel fi nish may be damaged by some laundry pre-treatment soil and stain remover products. Apply such products away from your dryer and wipe up any spills or overspray immediately.
special laundry tips SPECIAL LAUNDRY TIPS Please follow the care label or manufacturer’s instructions for drying special items. If care label instructions are not available, use the following information as a guide. Bedspreads & Comforters Blankets Curtains & Draperies Cloth Diapers Down–fi...
troubleshooting CHECK THESE POINTS IF YOUR DRYER… PROBLEM Doesn’t run. Doesn’t heat. Doesn’t dry. Is noisy. Dries unevenly. Has an odor. 32_ troubleshooting DV431AEP-03021A-01_EN.indd Sec12:32 DV431AEP-03021A-01_EN.indd Sec12:32 SOLUTION • Make sure the door is latched shut. • Be sure the power cord is plugged into a live electrical outlet. •...
Page 33
PROBLEM Shuts off before load is dry Lint on clothes Garments still wrinkled after Wrinkle-Care Odors remain in clothing after Refresh. Water drips from nozzle when Steam-Care starts Sprayed water is not visible during Steam-Care DV431AEP-03021A-01_EN.indd Sec12:33 DV431AEP-03021A-01_EN.indd Sec12:33 SOLUTION •...
Invalid power source Frequency Electronic Control Problem (Communication Error) Electronic Control Problem (Over Voltage Error) For any codes not listed above, call 1-800-SAMSUNG(726-7864). 34_ Appendix DV431AEP-03021A-01_EN.indd Sec8:34 DV431AEP-03021A-01_EN.indd Sec8:34 MEANING Clean the screen or vent. If the problem continues call for service.
appendix FABRIC CARE CHART The following symbols provide garment care direction. The Clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximize garment life and reduce laundering problems.
appendix PROTECTING THE ENVIRONMENT This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
CYCLE CHART Cycle Normal Heavy Duty Perm Press Towels Sensor Dry Bedding Plus Delicates Wool Sanitize Air Fluff Manual Dry Quick Dry Time Dry Wrinkle Away Steam Cycles Refresh DV431AEP-03021A-01_EN.indd Sec10:37 DV431AEP-03021A-01_EN.indd Sec10:37 Default Temp Sensor dry Time control level High Normal dry 42 min...
Page 38
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States.
Page 39
SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Page 40
QUESTIONS OR COMMENTS? Country U.S.A MEXICO DV431AEP-03021A-01_EN.indd Sec11:40 DV431AEP-03021A-01_EN.indd Sec11:40 CALL 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) OR VISIT US ONLINE AT www.samsung.com www.samsung.com Code No. DC68-03021A-01_EN 2011-02-08 2011-02-08 11:27:52 11:27:52...
Page 41
Secadora a gas y eléctrica Manual del usuario imagina Gracias por adquirir este producto Samsung. Para que podamos brindarle un servicio más completo, www.samsung.com/register DV431AEP-03021A-01_MES.indd 1 DV431AEP-03021A-01_MES.indd 1 las posibilidades registre su producto en DV431AE* DV431AG* 2011-02-08 2011-02-08 11:28:34 11:28:34...
Page 42
6. Ahorro de energía Las secadoras Samsung son súper efi cientes en el consumo de energía. Puede secar hasta 3,06 lb (1,38 kg) de ropa con 1 kWh. Además, tanto la gran capacidad como el control Fuzzy Logic ahorran energía secando automáticamente sus prendas de la manera más efi...
Felicitaciones por la compra de la nueva secadora Samsung. Este manual contiene información importante acerca de la instalación, el uso y el cuidado del electrodoméstico. Lea detenidamente estas instrucciones a fi n de aprovechar al máximo los múltiples benefi cios y funciones de la secadora.
Page 44
instrucciones de seguridad ADVERTENCIA: Para reducir el riesgo de incendio, descargas eléctricas o lesiones físicas cuando use este electrodoméstico, siga las instrucciones de seguridad básicas que fi guran ADVERTENCIA a continuación: 1. Lea todas las instrucciones antes de usar este electrodoméstico. 2.
Page 45
QUÉ HACER SI PERCIBE OLOR A GAS: • No intente encender ningún electrodoméstico. • No encienda este electrodoméstico. • No toque ningún interruptor eléctrico. • No utilice ningún teléfono de su edifi cio. • Haga que todos los ocupantes se retiren de la habitación, edifi cio o área. •...
Page 46
No se siente encima de la secadora. Debido a las constantes mejoras a los productos, Samsung se reserva el derecho de modifi car las especifi caciones sin previo aviso. Para conocer detalles completos, consulte las instrucciones de instalación incluidas con su producto antes de seleccionar los...
Page 47
contenido INSTALACIÓN DE LA SECADORA MANUAL DE INSTRUCCIONES, CUIDADO Y LIMPIEZA SUGERENCIAS PARA PRENDAS GUÍA DE SOLUCIÓN DE PROBLEMAS DV431AEP-03021A-01_MES.indd Sec3:7 DV431AEP-03021A-01_MES.indd Sec3:7 Herramientas necesarias para la instalación Consulte Exterior de la secadora Requisitos para el tendido de conductos Importante para el instalador Consideraciones acerca de la ubicación Instalación del electrodoméstico en un gabinete o en un hueco...
Page 48
instalación de la secadora HERRAMIENTAS NECESARIAS PARA LA INSTALACIÓN Contrate a un profesional para instalar la secadora adecuadamente. En caso de que sea necesaria una visita del servicio técnico como consecuencia de una mala confi guración, ajuste y conexión, se considerará responsabilidad del instalador.
REQUISITOS PARA EL TENDIDO DE CONDUCTOS • Utilice un conducto de acero galvanizado rígido o de aluminio rígido, de 4 pulgadas (10,2 cm) de diámetro. • No utilice un conducto de menor tamaño. • Los conductos de más de 4 pulgadas (10,2 cm) de diámetro pueden ocasionar una mayor acumulación de pelusa.
instalación de la secadora Si la nueva secadora se instala dentro de un sistema de drenaje existente, debe asegurarse de que: • el sistema de drenaje cumpla con todos los códigos locales, estaduales y nacionales; • no se utilice un conducto fl exible de plástico; •...
Page 51
INSTALACIÓN DEL ELECTRODOMÉSTICO EN UN GABINETE O EN UN HUECO DEJE UN ESPACIO LIBRE MÍNIMO CUANDO INSTALE EL ELECTRODOMÉSTICO EN UN GABINETE O EN UN HUECO: Laterales: 1 pulg. (25 mm.) Parte posterior: 4 pulg. (102 mm.) Si la lavadora y la secadora se instalan una junto a la otra, el frente del gabinete debe contar por lo menos con una abertura de aire sin obstrucciones de 72 pulg²...
Page 52
instalación de la secadora Con pedestal o kit de apilamiento opcionales Dimensiones requeridas de la instalación con pedestal 51,7 pulg. (131,4 cm) para poder abrir la puer 48 in.² * (310 cm²) 24 in.² * (155 cm²) Gabinete o puerta Dimensiones requeridas de la instalación con kit de apilamiento 6 in.
Page 53
Ubique un área en la que circule sufi ciente aire fresco. Se requiere un espacio mínimo de 72 pulg² (465 cm²) sin obstrucciones. Llame al 1-800-SAMSUNG(726-7864) para obtener más información acerca de la compra del kit de anclaje al piso como accesorio.
instalación de la secadora REQUISITOS EN CUANTO AL GAS Utilice únicamente gas natural o gas LP (gas licuado de propano). LA INSTALACIÓN DEBE REALIZARSE EN CONFORMIDAD CON LOS CÓDIGOS LOCALES, O EN AUSENCIA DE ELLOS, CON EL CÓDIGO NACIONAL PARA GAS Y COMBUSTIBLES ANSI/ Z223.1, LA REVISIÓN MÁS RECIENTE (PARA LOS ESTADOS UNIDOS), O CON LOS CÓDIGOS DE INSTALACIÓN CAN/CGA-B149 (PARA CANADÁ).
REQUISITOS ELÉCTRICOS El diagrama del cableado se encuentra en la parte posterior de la secadora. • La conexión inadecuada del conductor de conexión a tierra del equipo puede generar una descarga eléctrica. ADVERTENCIA Consulte a un electricista o técnico califi cado si le surgen dudas acerca de si la conexión a tierra de su secadora es correcta.
Page 56
instalación de la secadora CONEXIONES ELÉCTRICAS Antes de poner al electrodoméstico en funcionamiento o realizar pruebas, siga las instrucciones de conexión a tierra de la sección Conexión a tierra. Se recomienda que se destine un circuito derivado individual (o separado) sólo para la secadora. NO UTILICE UN CABLE PROLONGADOR.
Page 57
CONEXIÓN DE LA MANGUERA DE ENTRADA Método 1 La secadora debe conectarse a la llave de agua fría mediante las nuevas mangueras de entrada. No utilice mangueras viejas. 1. Si el espacio lo permite, conecte el extremo hembra de bronce del conector en forma de “Y” a la llave de agua fría. 2.
REEMPLAZO DE LAS PIEZAS Y LOS ACCESORIOS Si es preciso reemplazar piezas o accesorios de la secadora, comuníquese con el distribuidor al que le compró la secadora o con el centro de atención al cliente de SAMSUNG al 1-800-SAMSUNG(726-7864). INSTALACIÓN Reúna las herramientas y piezas necesarias antes de comenzar la instalación.
Page 59
4. Consulte la sección Drenaje antes de instalar el sistema de drenaje. Instale la red de conductos desde la secadora hasta la tapa de drenaje. El extremo con reborde de las secciones del conducto deben apuntar hacia afuera de la secadora. NO utilice tornillos con recubrimiento de metal cuando realice el montaje de los conductos.
Page 60
instalación de la secadora 6. Consulte la sección Requisitos en cuanto al gas. Retire la cubierta protectora de la rosca para tubos. Aplique compuesto de unión de tuberías o 1 1/2 vueltas aproximadamente de cinta de tefl ón en todas las conexiones roscadas.
Page 61
Conexiones de sistemas de 4 CABLES 1. Retire el tornillo central del bloque de terminales. 2. Conecte el cable a tierra (verde o sin cubierta) del cable de alimentación al tornillo conductor a tierra externo. 3. Conecte el cable neutro (cable blanco o central) del cable de alimentación y el cable a tierra del electrodoméstico (verde con franjas amarillas) debajo del tornillo central del bloque de terminales.
instalación de la secadora SUGERENCIAS ACERCA DEL DRENAJE DE LA SECADORA Un conducto fl exible de plástico o de un material que no sea el metal presenta un potencial riesgo de incendio. ADVERTENCIA 1. Asegúrese de que su secadora esté instalada correctamente para que extraiga el aire fácilmente.
Page 63
INVERSIÓN DE LA PUERTA 1. Desconecte el cable de alimentación. 2. Retire los dos tornillos de la bisagra de la puerta. 3. Levante la puerta y retírela. 4. Retire un tornillo del frente delantero. 5. Retire los dos tornillos del lado opuesto de la bisagra de la puerta.
Page 64
manual de instrucciones, sugerencias DESCRIPCIÓN GENERAL DEL PANEL DE CONTROL Eseleccionar un ciclo, gire el disco Selector de ciclos hasta llegar al ciclo deseado. La luz del indicador junto al nombre del ciclo se iluminará. Los ciclos Normal (Normal), Heavy Duty (Servicio pesado), Towels (Toallas), Perm Press (Plancha permanente), Delicates (Prendas delicadas) y Sanitize (Desinfección) son ciclos de Sensor Dry (Secado con sensor).
Page 65
Quick Dry (Secado rápido): ofrece un ciclo de secado en 30 minutos. Air Fluff (Secado a temperatura ambiente): este ciclo seca la carga con aire a temperatura ambiente. Refresh (Refrescar): este ciclo es el más adecuado para alisar arrugas y reducir los olores de las cargas de una a cuatro prendas secas.
Page 66
manual de instrucciones, sugerencias Para seleccionar el nivel de secado en los ciclos Normal (Normal), Heavy Duty (Servicio pesado), u otros ciclos de Sensor Dry (Secado con sensor), presione el botón Dry Level (Nivel de secado). Se iluminará una luz en el indicador junto al nivel de secado deseado.
SEGURO PARA NIÑOS Una función para evitar que los niños jueguen con la secadora. Confi guración/Liberación Si desea confi gurar o liberar esta función, presione simultáneamente los botones Temp. (Temp.) y Time (Tiempo) durante 3 segundos. Cómo confi gurarla: 1. Puede confi gurarse mientras su secadora está en funcionamiento. 2.
Page 68
manual de instrucciones, sugerencias RACK DRY (SECADO EN ESTANTE) Instalación del estante de secado 1. Abra la puerta de la secadora. 2. Coloque el estante de secado en el tambor, con el borde superior del estante de secado encima del fi ltro para pelusas. 3.
LIMPIE EL FILTRO PARA PELUSAS • Después de cada carga. • Para reducir el tiempo de secado. • Para hacer uso de la energía con mayor efi cacia. No haga funcionar la secadora sin el fi ltro para pelusas colocado. CARGUE LA SECADORA DE MANERA ADECUADA •...
cuidado y limpieza PANEL DE CONTROL Limpie con un paño suave y húmedo. No utilice sustancias abrasivas. No rocíe el panel directamente con limpiadores en aerosol. El acabado del panel de control puede dañarse a causa de algunos productos removedores de suciedad y manchas de tratamiento previo al lavado.
sugerencias para prendas especiales SUGERENCIAS PARA PRENDAS ESPECIALES Siga las instrucciones del fabricante o de la etiqueta de indicaciones para secar prendas especiales. Si no se dispone de etiquetas con indicaciones, use la siguiente información como guía. Cubrecamas y edredones Ropa de cama Cortinas y paños de tela Pañales de tela...
guía de solución de problemas CONTROLE ESTOS PUNTOS SI SU SECADORA… PROBLEMA No funciona. No calienta. No seca. Hace ruido. No seca de manera uniforme. 32_ guía de solución de problemas DV431AEP-03021A-01_MES.indd Sec8:32 DV431AEP-03021A-01_MES.indd Sec8:32 SOLUCIÓN • Asegúrese de que la puerta esté cerrada con traba. •...
Page 73
PROBLEMA Tiene olor. Se apaga antes de que la carga esté seca Pelusa en las prendas Prendas arrugadas después del ciclo Wrinkle-Care (Antiarrugas) Quedan olores en la ropa después de Refresh (Refrescar). Gotea agua de la boquilla cuando comienza Steam- Care (Proceso de vapor) No se ve el agua rociada durante Steam-Care...
Page 74
Problema con el control electrónico (Falla de comunicación) Problema con el control electrónico (Falla de sobrevoltaje) Para los códigos que no fi guran más arriba, llame al 1-800-SAMSUNG(726-7864). 34_ guía de solución de problemas DV431AEP-03021A-01_MES.indd Sec8:34 DV431AEP-03021A-01_MES.indd Sec8:34 SIGNIFICADO Limpie el fi...
apéndice TABLA DE INDICACIONES SOBRE LA TELA Los siguientes símbolos ofrecen indicaciones acerca de las prendas. La etiqueta de indicaciones de la prenda incluye símbolos para lavado, blanqueado, secado y planchado, o limpieza a seco cuando sea necesaria. El uso de símbolos garantiza la consistencia entre los fabricantes textiles de artículos nacionales e importados.
Page 76
apéndice PROTECCIÓN DEL MEDIO AMBIENTE Este electrodoméstico se fabrica con materiales reciclables. Si decide desechar este electrodoméstico, siga la normativa local relacionada con la eliminación de desechos. Corte el cable de alimentación para que el electrodoméstico no pueda conectarse a una fuente de alimentación. Quite la puerta para que los animales y los niños pequeños no puedan quedar atrapados dentro del electrodoméstico.
TABLA DE CICLOS Ciclo Normal Potencia extra Plancha permanente (Media (Sin cambios)) Toallas Ropa de cama Secado con sensor Prendas delicadas Lana Desinfección Secado a temperatura ambiente Secado Secado manual rápido Secado con temporizador Steam Antiarrugas Cycles (Ciclos de Refrescar vapor) DV431AEP-03021A-01_MES.indd Sec10:37 DV431AEP-03021A-01_MES.indd Sec10:37...
Page 78
La presente garantía limitada comienza en la fecha original de compra y es válida únicamente para productos comprados y usados en los Estados Unidos. Para recibir el servicio técnico de la garantía, el comprador debe comunicarse con SAMSUNG con el fi n de que se determine el problema y los procedimientos del servicio.
Page 79
EXCEPTO LO ESTABLECIDO EN EL PRESENTE, NO EXISTEN GARANTÍAS SOBRE ESTE PRODUCTO, YA SEAN EXPRESAS O TÁCITAS, Y SAMSUNG DESCONOCE TODAS LAS GARANTÍAS QUE INCLUYEN, AUNQUE NO EN CARÁCTER TAXATIVO, CUALQUIER GARANTÍA TÁCITA DE QUE EL PRODUCTO SE ENCUENTRA EN CONDICIONES APTAS PARA LA VENTA, DE DEFRAUDACIÓN DE DERECHOS O DE QUE EL PRODUCTO SE ADECUA A LOS FINES ESPECÍFICOS PARA LOS CUALES SE ADQUIERE.
Page 80
¿TIENE PREGUNTAS O COMENTARIOS? País U.S.A MEXICO DV431AEP-03021A-01_MES.indd Sec11:40 DV431AEP-03021A-01_MES.indd Sec11:40 LLAME AL 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) N.º de código: DC68-03021A-01_MES O VISÍTENOS EN LÍNEA EN www.samsung.com www.samsung.com 2011-02-08 2011-02-08 11:28:56 11:28:56...