ABB PSTX30 Installation And Commissioning Manual page 77

Hide thumbs Also See for PSTX30:
Table of Contents

Advertisement

7.8
Slow speed
Slow speed is an individual function, or a pre-start
function to run the motor with low voltage output. This
feature can, for example, be used to position a traverse or
millband.
This function can be operated via the HMI, IO or fieldbus.
Slow speed has four pre-defined speeds:
Fast jog
Jog
Creep
The motor strength can be adjusted with separate
parameters. Choose a suitable value for the application.
INFORMATION
Too high value of the motor strength could cause
oscillations and if too low the motor may not start.
It is possible to run the motor in both the forward and
reverse direction, with different slow speed speeds in both
directions.
When a Slow speed signal is given, the motor will
accelerate up to a constant speed, that is slower than
the nominal speed, for as long as the slow speed
signal remains active. When the Slow speed signal is
deactivated, the softstarter immediately cuts the voltage
applied to the motor and the motor stops.
For navigation, see chapter 6.2.4 Motor Jog
Slow speed
is configured with the following
parameters:
Parameter
02.07 Pre-start function
02.08 Pre-start time
06.01 Slow speed forward
06.02 Slow speed forward strenght
06.03 Slow speed reverse
06.04 Slow speed rev strength
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Set to Slow speed forward or Slow speed
reverse.
Sets the duration of the pre-start function.
Sets the Slow speed forward. Fast jog forward is
33%, Jog forward is 15 % and Creep forward is
8 % of the nominal motor speed.
Parameter related to the torque that is
generated during Slow speed in the forward
direction.
Sets the Slow speed reverse. Fast jog reverse is
33%, Jog reverse is 20 % and Creep reverse is
9 % of the nominal motor speed.
Parameter related to the torque that is
generated during Slow speed in the reverse
direction.
Setting range
Default value
Off, Motor
Off
heating, Stand
still brake, Jog
forward, Jog
backward
0.0 ... 7200.0 s
10.0 s
Fast jog, Jog,
Jog
Creep
10 ... 100%
50%
Fast jog, Jog,
Jog
Creep
10 ... 100%
50%
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents