ABB PSTX30 Installation And Commissioning Manual page 59

6.4.4 Backup handling
Path in menu:
Menu Backup handling
u
For navigation, see Figure 66.
The detachable keypad can be used to transfer
parameters from one softstarter to another during
commissioning.
Transfer of parameters
To transfer (or copy) parameters from one softstarter to
another, connect the keypad to the chosen softstarter and
follow the instructions in chapter 6.4.4.1 and
chapter 6.4.4.2 below:
Create backup
6.4.4.1
1. Press "Select" to enter the Backups handling
menu.
2. Press "Create backup" to create a backup.
3. The download of parameters will show as in
Figure 67. The name of the backup file is
displayed as the day, month and year it was
created.
Replace backup
The softstarter can store two backups. Use the Navigation
keys to select a earlier backup and press
to replace a backup.
Uploading of parameters
6.4.4.2
1. After finishing the download of parameters, detach
the HMI from the softstarter.
2. Connect the HMI to the softstarter that is to receive
the backup from the HMI.
3. Enter the Backup handling menu and use the
Navigation keys to select the backup.
4. Press "Select" to upload parameters. The
upload of parameters will show as in Figure 68.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
MENU
Parameters
Assistants
Motor jog
Event log
Backup handling
System info
Settings
Figure 66: Backups
67
"Replace",
Fig. 67: Downloading
68
Fig. 68: Uploading
Create backup
01.11.2014
handling.
Local PSTX HMI
Back up parameters
Cancel 14:30
parameters.
Local PSTX HMI
Restoring parameters
Cancel 14:30
parameters.
6
0
0