Toshiba MITOS VT6 AIR User Manual page 6

PARAMETER
Var. monitor1
Var. monitor2
Set point manual
Store set point
02/10/2015
FUNCTION
Sets the monitor variable shown in the first line
of the normal functioning display menu.
Var. monitor1 will be visualized only in the
following cases:
Mode = MONITOR
or
1) Mode = COMMAND
2) the MITOS VT6 AIR has only the run/stop
1
command ( )
Sets the monitor variable shown in the second
line of the normal functioning display menu.
Var. monitor2 will always be visualized and can
be changed pushing UP and DOWN buttons
while keeping F2 key pushed. But in this case the
selection will be kept only until the device is on
Sets the value of the frequency sent to the
inverter in MANUAL functioning. This value
can be modified from the normal functioning
menu
It allows to store automatically or not the set
point variation chosen with the UP and DOWN
keys.
Selecting YES, the set point variation (of the
frequency or of the variable regulated in the PID
control) from the normal functioning menu, is
automatically stored.
Selecting NO, the set point variation is not
automatically stored and when you turn on the
device again the value reloaded is the one saved
using the parameters programming menu.
see appendix (
see appendix (
6 / 17
POSSIBLE VALUES
3
)
3
)
0.0 500.0 Hz
- YES
- NO
Manual_MITOS_VT6_AIR_ver3p3_eng