Interconnect Port Leds; Fibre Channel Adapter Port Leds - HP 3PAR StoreServ 7000 Service Manual

Table 8 SAS port LEDs
Callout
1
2

Interconnect Port LEDs

The controller node has two interconnect ports and each includes two LEDs.
Table 9 Interconnect port LEDs
7200
7400

Fibre Channel Adapter Port LEDs

The Fibre Channel adapter in the controller node includes Fibre Channel port LEDs:
Figure 22 Fibre Channel 4–port LEDs
Table 10 Fibre Channel adapter port LEDs
Callout
1
24 Understanding LED Indicator Status
LED Appearance
DP- 1 Green
DP-2 Green
LED Appearance
All ports No light
Port speed Amber
Indicates
Off – SAS link is present or not, this LED does not remain lit
Flashing – Activity on port
Off – SAS link is present or not, this LED does not remain lit
Flashing – Activity on port
A 7200 does not use any external interconnect links. Interconnect
port LEDs should always be off.
Fault Amber On
Off
Flashing
Status Green On
Off
Indicates
Off – Wake up failure (dead device) or power is not
applied
Off – Not connected
3 fast blinks – Connected at 4GB/sec.
Failed to establish link connection
No error currently on link
1. Interconnect cabling error
2. Controller node in wrong slot
3. Serial number mismatch between
controller nodes
Link established
Link not yet established