Table 9 FC port LEDs
Callout
FP- 1 /FP-2
SAS Port LEDs
The controller node has two SAS ports and each includes four LEDs, numbered 0–3:
Figure 17 SAS port LEDs
Table 10 SAS port LEDs
Callout
1
2
Interconnect Port LEDs
The controller node has two interconnect ports and each includes two LEDs
LED
Appearance
1 and 2
No light
Port speed (Amber) 1
Amber light off
Amber (3 blinks
per second)
Amber (4 blinks
per second)
Link status (Green) 2
Steady green light
2-3 blinks per
second
LED
Appearance
DP- 1
Green
DP-2
Green
Indicates
Wake up failure (dead device) or power is not applied
Not connected
Connected at 4 Gb/sec.
Connected at 8 Gb/sec.
Normal/Connected – link up.
Link down or not connected
Indicates
Off – SAS link is present or not, this LED does not remain lit
Flashing – Activity on port
Off – SAS link is present or not, this LED does not remain lit
Flashing – Activity on port
Controller Node and Internal Component LEDs
17