Siemens HiPath 4000 Operating Manual page 71

Step by step
> <
NEXT
> <
BASIC SERVICE
> <
DESTINATIONS
FORWARD
NEXT
NEXT
> <
ENTER DESTIN.:
SAVE
[
Confirm to select the next variable forwarding type.
or
> <
To edit the current variable forwarding type, select the
required command.
Programming a forwarding destination
u Open the System Menu.
[
Select and confirm the basic service.
[
Select the menu item and confirm.
[
Confirm. The display shows "variable forwarding".
[
Confirm. The display shows "FWD-FIXED off".
[
Confirm. The display shows "Forwarding for internal".
[
Select and confirm.
o
Enter the phone number for the forwarding destination.
Any destination previously programmed will be over-
written.
[
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed on
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted ((for exception, see
forwarding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically delet-
ed when the forwarding type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
Deactivating variable forwarding
You can deactivate all variable forwarding types in the
Service Menu (Basic Service).
Conducting calls – enhanced functions
Page 62.
Page 62). Fixed
63