System Overview - Bosch B426 Installation And Operation Manual

Conettix Ethernet Communication Module
3

System overview

Use the B426 for bi-directional communication over an Ethernet network.
Figure 3.1: B426 system connections overview
Callout ᅳ Description
1 ᅳ Compatible Bosch control panel
2 ᅳ Data bus connection between the control
panel and the module
3 ᅳ B426
4 ᅳ Ethernet connection between module and
Ethernet network
5 ᅳ Ethernet network, Local Area Network
(LAN), Metropolitan AreaNetwork (MAN), Wide
Area Network (WAN), or Internet
6 ᅳ Ethernet network connection to the
D6100i Communications Receiver (D6100i/
D6100IPv6)
Bosch Security Systems, Inc.
1
2
12
9
10
Callout ᅳ Description
7 ᅳ Conettix D6100i Communications Receiver/Gateway and/or
Conettix D6600 Communications Receiver/Gateway (Conettix
D6600 Communications Receiver/Gateway requires 8, 9, and 10)
8 ᅳ Ethernet network connection to the Ethernet adapter
(D6680/ITS-D6682/ITS-D6686) (ITS-D6682 shown) Ethernet
Network Adapter
9 ᅳ Conettix Ethernet Network Adapter (ITS-D6682 shown)
10 ᅳ Connection from ITS-D6682 to the COM4 Port on the
Conettix D6600 Communications Receiver/Gateway
11 ᅳ Ethernet network connection between the host computer
Ethernet network interface card (NIC) and the Ethernet network
12 ᅳ Host PC running Remote Programming Software,
Automation, or the Conettix D6200 Programming/Administration
Software
Installation and Operation Guide
4
3
11
8
7
System overview | en
5
6
2016.08 | 08 | F.01U.266.226
7