Using The Tripod Adapter; Using The Remote Control - Silvercrest SWK 360 A1 Operating Instructions And Safety Instructions

Using the tripod adapter

NOTE
► The tripod adapter
♦ Screw the tripod adapter
♦ Screw the camera onto a suitable tripod.

Using the remote control

If the camera is switched on, you capture videos and photos using the remote control
NOTE
► If the Wi-Fi connection of the camera is activated, the remote control
► If the camera automatic screen saver is active, so that the display
the
► When you press one of the buttons on the remote control
briefly.
► You can only capture a photo or video if the display
♦ Briefly press the
♦ Press and hold down the
♦ Press and hold down the
♦ Press the
photo at the same time.
NOTE
► If the camera is switched on, you can switch on the display
on the camera.
CAUTION
Damage to the remote control!
► Prevent the remote control from coming into contact with water.
■ 48 GB│IE│NI
│
is suitable for all tripods with a 1/4" thread.
into the thread on the camera.
button or the button to reactivate the display
button to take a photo.
button for 3 seconds to start recording a video.
button for 3 seconds again to stop the recording.
button briefly during video capture to stop the video recording and take a
cannot be used.
is inactive, briefly press
.
, the operating LED
is active.
by pressing the
.
flashes
button
SWK 360 A1