Silvercrest SWK 360 A1 Operating Instructions And Safety Instructions page 49

Rod mount
♦ Undo the nuts (if necessary, completely) from the rod mount
♦ Place the upper element of the rod mount
through both screw ends so that the rod lies on both rubber plates.
♦ Screw the nuts onto the two screw ends.
♦ Undo the screw on the connector and remove it completely from the mount.
NOTE
► You can also install the rod mount
Optionally, both systems can be combined using the plug connector to ball joint adapter
► The rod mount
SWK 360 A1
with the ball adapter
can be mounted on a bicycle, for example.
and remove the lower piece.
around the rod and guide the lower element
or the plug connector .
.
GB│IE│NI 45
│
■