2.7.4
TSW Conference Expansion Card (KX-TD50104)
Connector
1) Connection to the TSW card
TSW Conference Card
1. Insert the 30-pin connector (plug) on the TSW CONF card into the 30-pin connector (jack)
on the TSW card.
2. Install the TSW card into the Basic Slot 2 (BS2). See Section 2.3.2 "TSW Card."
2-60
Installation
"CONF" is marked.
50-pin connector
56-pin connector
(Plug)
Make sure the card is
in the correct direction
50-pin connector
56-pin connector
(Jack)
TSW Card
• This card is installed on the T-SW card.