Ucd Time Table - Panasonic KX-TD500 Installation Manual

4.5.13 UCD Time Table

If all extensions in a UCD group are busy, the incoming outside calls will be handled by the
UCD Time Table procedure.
Up to 32 UCD Time Tables, max.16 steps for each, can be assigned.
Value Range
Parameter
(default)
Table No.
Command
Sequence
4-94 System Programming
1-32 Specifies the UCD Time Table number which you are
(1) going to program.
S(1 - 8) The following commands are provided to make up a
1T - 4T UCD Time Table procedure.
TR
RET <Commands list and their functions>
OFF S (1-8):
(None) OGM (1-8) is sent to the caller if available. If not, wait
until OGM (1-8) becomes available.
1T - 4T:
Callers are put in the waiting queue for N (1-4) x 16
seconds while hearing the ringback tone or music on hold.
TR:
Transfers a call to the Overflow destination.
RET:
Returns to the first step of the sequence.
OFF:
Disconnects the call compulsorily.
Description/Function Reference